EPA TRI Facility · Plastics and Rubber

Midwestern Fabricators Inc

Salt Lake City, UT

Total releases
125.6K lbs
Chemicals reported
1
Carcinogens
1
Primary pathway
Air Releases

AIR Form-R mix

Midwestern Fabricators Inc: how the 125.6K lbs splits

125.6K lbs across all reported pathways

  • Air Releases 125.6K lbs 100.0%

Midwestern Fabricators Inc's 125.6K lbs Form-R total is AIR - air releases is 100.0% of the bar. Off-site transfers stay separate from air, water, and land releases. Leading chemical by pounds: Styrene.

MID volume AIR pathway CARC-HEAVY

Midwestern Fabricators Inc is an EPA Toxics Release Inventory reporter in Salt Lake City, UT, in the plastics and rubber sector. It reported 27.6K lbs of releases across 1 chemical in 2023, and 125.6K lbs in total across its 2019-2023 reporting years. That ranks 4,101 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In Utah's 220 reporting TRI sites, pounds #1 is not chemical-count #1. Midwestern Fabricators Inc is pounds #46 and chemical-count #178 at 125.6K lbs. Kennecott Utah Copper Mine Concentrators & Power Plant leads reported pounds (781.4M lbs) at 34 chemicals (chemical-count #4). Clean Harbors Aragonite LLC leads chemical count at 193 chemicals (13.3M lbs, pounds #6). Reported volume rose against 2022. Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Airgas USA LLC; Blanchard Metals Processing Co; Brenntag Pacific Inc; Varex Imaging Corp. Similar-scale Plastics and Rubber peers outside Utah: Timken Smo LLC; Die Molding Corp; Steele Plastics LLC; Cutting Edge Composites. Largest disclosed chemicals by pounds: Styrene.

View saved records
Verify at EPA TRI →

Midwestern Fabricators Inc stamps MID volume with a dominant AIR pathway (100.0% air releases) across 1 chemical · 1 carcinogen-classified. Cumulative Form-R extract: 125.6K lbs (2019–2023). All figures are self-reported EPCRA §313 estimates, not measured stack emissions or a health-risk score. Scale peers include Timken Smo LLC and Die Molding Corp.

#4,101 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Midwestern Fabricators Inc vs. every reporting TRI facility

Cumulative reported release pounds, with this facility marked in the national distribution

126K lbs Top 16% higher than 84% of 25,986 reporting TRI facilities

This facility 0 lbs 20M+ lbs every reporting TRI facility, bucketed by value

Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.

Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year

Midwestern Fabricators Inc: Styrene-led volume

Among the 1,504 Plastics and Rubber facilities in this database, Midwestern Fabricators Inc reports the 286th-largest volume, placing it in the top 19% of its sector. Its reported volume is concentrated rather than spread: Styrene alone is 100% of the total. Carcinogen-classified chemicals make up 100% of the reported pounds, not just of the chemical count. Scale peers outside Utah include Timken Smo LLC and Die Molding Corp.

Concentrated means ≥60% of Midwestern Fabricators Inc's pounds in one chemical - here Styrene at 100%. Not a toxicity score.

Annual disclosure change

What changed: EPA TRI 2023 reporting year

2022 → 2023
  • Midwestern Fabricators Inc's total reported releases rose from 25.2 thousand lb in 2022 to 27.6 thousand lb in 2023, based on EPA TRI filings.
  • Midwestern Fabricators Inc's air releases rose from 25.2 thousand lb in 2022 to 27.6 thousand lb in 2023, based on EPA TRI filings.

Midwestern Fabricators Inc Form-R facts

Sector
Plastics and Rubber
MID volume
125.6K lbs
AIR pathway
Air Releases
CARC-HEAVY chem count
1 · 1 carc.
Lead chemical
Styrene

Compare this facility

See how Midwestern Fabricators Inc stacks up against nearby facilities and the typical reporter.

Total reported releases
Midwestern Fabricators Inc
125.6K lbs
Airgas USA LLC
1.4K lbs

91.6× more than the comparison

Chemicals reported
Midwestern Fabricators Inc
1
Airgas USA LLC
1

About the same as the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Midwestern Fabricators Inc releases toxic chemicals into the environment. Total: 125.6K lbs.

Air Releases 125.6K lbs (100.0%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 13% (24.4K lbs to 27.6K lbs).

Midwestern Fabricators Inc: annual Form-R pounds

MID site · AIR pathway · TRI years 2019–2023

million lbs

What this shows Midwestern Fabricators Inc year-over-year reported totals (increased by 13% from 2019 to 2023). TRI figures are self-reported estimates and can swing with production, waste handling, and reporting changes, not only with controls. Lead chemical in the extract: Styrene.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 24.4K lbs 1
2020 22.8K lbs 1
2021 25.6K lbs 1
2022 25.2K lbs 1
2023 27.6K lbs 1

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 1 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Styrene 125.6K lbs Carcinogen

Midwestern Fabricators Inc · AIR-pathway site

Salt Lake City, UT
40.7425, -111.9579
County TRI context
Salt Lake · 0.0% of county pounds
EPA Facility ID
84104DLTFB1235S

Compare beyond Utah

Nationwide peers by reported pounds & chemical count

Cross-state TRI reporters nearest Midwestern Fabricators Inc on cumulative reported pounds (125.6K lbs) and distinct chemical count (1). Release-pound peers include U.S. Army National Guard Camp Robinson Ranges, Associated Milk Producers Inc, The Lycra Co la Porte Plant (previously Invista Sarl. Chemical-count peers include Ecoelectrica LP, Planta Penuelas, Tallaboa Puerto Rico LLC. Neighborhoods are forced disjoint so each axis surfaces a different set of sites.

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

On this page the largest disclosed chemicals include Styrene; nearby reporters include Airgas USA LLC. Midwestern Fabricators Inc stamps MID volume · AIR pathway · CARC-HEAVY carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.

Use and verify this record

This Midwestern Fabricators Inc TRI extract (MID · AIR · CARC-HEAVY · lead Styrene) joins EPA Form-R filings with facility identity - reported pounds, not a health-risk rating.

Midwestern Fabricators Inc totals are self-reported EPCRA §313 estimates for Salt Lake City, UT, latest year 2023. Form-R rows span 2019–2023 (5 years). NAICS 326199 · Plastics and Rubber. 0.0% of Salt Lake TRI pounds in this extract. Nearest ABS peer: U.S. Army National Guard Camp Robinson Ranges (Δ 11 lbs). Pounds ≠ exposure.

Midwestern Fabricators Inc stamps MID volume · AIR pathway · CARC-HEAVY · lead Styrene. PlainEnviro renders this EPA Form-R extract from its pipeline; no figure is typed in by an editor. Corrections: editorial policy.

All federal data sources used on this page
  • EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
  • EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
  • EPA Facility Registry Service - facility location and identity. epa.gov
  • EPA ECHO - regulatory and compliance context. epa.gov
  • EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov