EPA TRI Facility · Fabricated Metals

Profile Finishing Systems Inc.

Waukesha, WI · Parent: Wisconsin River Partners

Total releases
104.3K lbs
Chemicals reported
3
Carcinogens
1
Primary pathway
Air Releases
Verify at EPA TRI →

Profile Finishing Systems Inc. has reported 104.3K lbs of toxic releases across 3 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 33% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#4,493 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Profile Finishing Systems Inc. files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332812 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 104.3K lbs in cumulative toxic releases across 3 distinct chemicals, 1 of which (33%) carry a carcinogenic classification.

The dominant release pathway is air releases at 103.8K lbs (99.5% of total volume), followed by off-site transfers at 0.5%. Between 2019 and 2023, reported totals held roughly flat - from 23.9K lbs to 24.0K lbs. The facility is operated under parent company Wisconsin River Partners.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Profile Finishing Systems Inc. has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332812
Total Releases
104.3K lbs
Chemicals Reported
3
Latest Report Year
2023

Compare this facility

See how Profile Finishing Systems Inc. stacks up against nearby facilities and the typical reporter.

Total reported releases
Profile Finishing Systems Inc.
104.3K lbs
Mullins Cheese Inc
11.2M lbs

99% less than the comparison

Chemicals reported
Profile Finishing Systems Inc.
3
Mullins Cheese Inc
3

About the same as the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Profile Finishing Systems Inc. releases toxic chemicals into the environment. Total: 104.3K lbs.

Air Releases 103.8K lbs (99.5%)
Off-site Transfers 480 lbs (0.5%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases held roughly flat (23.9K lbs to 24.0K lbs).

Reported total releases by year

Profile Finishing Systems Inc. - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 23.9K lbs 3
2020 15.3K lbs 2
2021 19.1K lbs 3
2022 22.0K lbs 3
2023 24.0K lbs 3

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 3 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Methyl isobutyl ketone 50.6K lbs Carcinogen
Toluene 33.2K lbs -
Xylene (mixed isomers) 20.6K lbs -

Location

Coordinates
42.9828, -88.2439
ZIP Code
53189
EPA Facility ID
5318WPRFLF191SP

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Profile Finishing Systems Inc. release?
Profile Finishing Systems Inc. has reported releases of 3 chemicals to the EPA Toxic Release Inventory, totaling 104.3K lbs. 1 of these (33%) are classified as carcinogens.
What industry is Profile Finishing Systems Inc. in?
Profile Finishing Systems Inc. is classified under the "Fabricated Metals" industry (NAICS code 332812), located in Waukesha, WI.
How long has Profile Finishing Systems Inc. reported to the TRI?
Profile Finishing Systems Inc. has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Profile Finishing Systems Inc. release toxic chemicals?
The primary release pathway for Profile Finishing Systems Inc. is air releases, accounting for 99.5% of total releases (103.8K lbs). Secondary pathway: off-site transfers (0.5%).
Are emissions from Profile Finishing Systems Inc. increasing or decreasing?
From 2019 to 2023, total releases held roughly flat, from 23.9K lbs to 24.0K lbs.
Is Profile Finishing Systems Inc. a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Profile Finishing Systems Inc. release carcinogens?
Yes, Profile Finishing Systems Inc. reports 1 chemical classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Profile Finishing Systems Inc. are rising or falling over time. View trends
  • This facility ranks #4,493 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Wisconsin's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Wisconsin profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Profile Finishing Systems Inc.. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.