EPA TRI Facility · Fabricated Metals

Steelfab Inc. in Alabama

Roanoke, AL · Parent: Steelfab Inc

Total releases
33.0K lbs
Chemicals reported
6
Carcinogens
2
Primary pathway
Air Releases

Reported-total composition

How the reported total is distributed

33.0K lbs across all reported pathways

  • Air Releases 32.9K lbs 99.8%
  • Water Discharges 77 lbs 0.2%
  • Land Disposal 0 lbs <0.1%

The segments reconcile to the cumulative total shown above. Off-site transfers are shown separately from releases to air, water, and land.

Carcinogen-classified pounds vs other reported pounds

Same cumulative TRI total as above, split by EPA/IARC carcinogen classification on each chemical: pounds share, not chemical count. Classification is not a site health-risk score.

LIGHT volume AIR pathway CARC-LEAN

Steelfab Inc. in Alabama is an EPA Toxics Release Inventory reporter in Roanoke, AL, in the fabricated metals sector. It reported 123 lbs of releases across 5 chemicals in 2023, and 33.0K lbs in total across its 2019-2023 reporting years. That ranks 7,080 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In Alabama's 559 reporting TRI sites, Chemical Waste Management leads both reported pounds (95.6M lbs) and chemical count (98 chemicals). The two rankings do not invert in this pool. Reported volume fell against 2022. Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Fiberglass Unlimited Inc; Kardoes Rubber Co Inc a Hexpol Co; East Alabama Lumber Co Inc.; West Fraser Huguley. Similar-scale Fabricated Metals peers outside Alabama: Skf USA Inc; Missouri Plating Co; Wheeling-Nippon Steel; Balon Corp. Other Steelfab Inc sites in this extract: Steelfab Inc; Steelfab of Dublin Georgia Inc; Steelfab Inc. (charlotte). Largest disclosed chemicals by pounds: Xylene (mixed isomers); Manganese; Copper; Nickel.

View saved records
Verify at EPA TRI →

Steelfab Inc. in Alabama has reported 33.0K lbs of toxic releases across 6 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 2 are classified as carcinogens, representing 33% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#7,080 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Steelfab Inc. in Alabama vs. every reporting TRI facility

Cumulative reported release pounds, with this facility marked in the national distribution

33K lbs Top 27% higher than 73% of 25,986 reporting TRI facilities

This facility 0 lbs 20M+ lbs every reporting TRI facility, bucketed by value

Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.

Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year

Where this facility sits in the TRI record

Among the 3,421 Fabricated Metals facilities in this database, Steelfab Inc. in Alabama reports the 809th-largest volume, placing it in the top 23.6% of its sector. This one site accounts for 39.8% of every pound reported in Randolph. Its reported volume is concentrated rather than spread: Xylene (mixed isomers) alone is 88.1% of the total.

Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.

Annual disclosure change

What changed: EPA TRI 2023 reporting year

2022 → 2023
  • Steelfab Inc. in Alabama's total reported releases fell from 9.4 thousand lb in 2022 to 123 lb in 2023, based on EPA TRI filings.
  • Steelfab Inc. in Alabama's air releases fell from 9.4 thousand lb in 2022 to 103 lb in 2023, based on EPA TRI filings.
  • Steelfab Inc. in Alabama's water releases fell from 48 lb in 2022 to 20 lb in 2023, based on EPA TRI filings.
  • Steelfab Inc. in Alabama's chemicals reported fell from 6 in 2022 to 5 in 2023, based on EPA TRI filings.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332312
Total Releases
33.0K lbs
Chemicals Reported
6
Latest Report Year
2023

Compare this facility

See how Steelfab Inc. in Alabama stacks up against nearby facilities and the typical reporter.

Total reported releases
Steelfab Inc. in Alabama
33.0K lbs
Fiberglass Unlimited Inc
49.8K lbs

34% less than the comparison

Chemicals reported
Steelfab Inc. in Alabama
6
Fiberglass Unlimited Inc
1

6.0× more than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Steelfab Inc. in Alabama releases toxic chemicals into the environment. Total: 33.0K lbs.

Air Releases 32.9K lbs (99.8%)
Water Discharges 77 lbs (0.2%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 99% (8.8K lbs to 123 lbs).

Reported total releases by year

Steelfab Inc. in Alabama - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 8.8K lbs 6
2020 9.9K lbs 6
2021 4.8K lbs 6
2022 9.4K lbs 6
2023 123 lbs 5

Chemical Releases

Aggregated across all reporting years (2019–2023). 2 of 6 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Xylene (mixed isomers) 29.0K lbs -
Manganese 1.4K lbs -
Copper 1,000 lbs -
Nickel 965 lbs Carcinogen
Chromium 569 lbs -
Lead 48 lbs Carcinogen

Location

Coordinates
33.1293, -85.3517
ZIP Code
36274
EPA Facility ID
36274STLFB398ST

Compare beyond Alabama

Nationwide peers by reported pounds & chemical count

Cross-state TRI reporters nearest Steelfab Inc. in Alabama on cumulative reported pounds (33.0K lbs) and distinct chemical count (6). Release-pound peers include Skf USA Inc, Solimide Foams, Quail Hollow LLC. Chemical-count peers include Eaton Intelligent Power Ltd, Turf Care Supply-Hatfield Plant, Westfield Electroplating Co. Neighborhoods are forced disjoint so each axis surfaces a different set of sites.

Other Steelfab Inc Facilities

Same-parent TRI sites ranked by reported releases - including Steelfab Inc, Steelfab of Dublin Georgia Inc, Steelfab Inc. (charlotte).

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

On this page the largest disclosed chemicals include Xylene (mixed isomers), Manganese, Copper, Nickel; nearby reporters include Fiberglass Unlimited Inc. Steelfab Inc. in Alabama stamps LIGHT volume · AIR pathway · CARC-LEAN carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.

Use and verify this record

This Steelfab Inc. in Alabama record combines EPA TRI filings, facility identity, and compliance context without turning reported releases into a health-risk rating.

TRI release totals are self-reported estimates, not measured stack emissions. The methodology explains how records are joined, computed, and refreshed.

PlainEnviro renders public EPA records directly from its data pipeline; no figure on this page is typed in by an editor. See the editorial standards and corrections policy for how source changes and reported errors are handled.

All federal data sources used on this page
  • EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
  • EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
  • EPA Facility Registry Service - facility location and identity. epa.gov
  • EPA ECHO - regulatory and compliance context. epa.gov
  • EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov