EPA TRI Facility · Fabricated Metals

Samuel Advanced Fabrication a Div of Samuel Son & Co.

Tucson, AZ · Parent: Samuel Son & Co Ltd

Total releases
608 lbs
Chemicals reported
4
Carcinogens
1
Primary pathway
Air Releases

Samuel Advanced Fabrication a Div of Samuel Son & Co. is an EPA Toxics Release Inventory reporter in Tucson, AZ, in the fabricated metals sector. It reported 129 lbs of releases across 4 chemicals in 2023, and 608 lbs in total across its 2019-2023 reporting years. That ranks 14,517 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. Pounds reported are not a measure of toxicity or health risk.

View saved records
Verify at EPA TRI →

Samuel Advanced Fabrication a Div of Samuel Son & Co. has reported 608 lbs of toxic releases across 4 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 25% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 79% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#14,517 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Where this facility sits in the TRI record

Among the 3,421 Fabricated Metals facilities in this database, Samuel Advanced Fabrication a Div of Samuel Son & Co. reports the 1,852nd-largest volume (608 lbs).

Placement is computed from reported TRI pounds in this database. Thresholds are fixed across every facility page: concentrated ≥60% of volume in one chemical, county-dominant ≥25% of the county total, carcinogen-heavy ≥50% of pounds. Share-based statements are shown only for sites reporting at least 1,000 lbs, because a share of a very small total is not a meaningful signal. Reported pounds are self-reported estimates and do not measure toxicity or health risk.

Samuel Advanced Fabrication a Div of Samuel Son & Co. files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332312 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 608 lbs in cumulative toxic releases across 4 distinct chemicals, 1 of which (25%) carry a carcinogenic classification.

The dominant release pathway is air releases at 481 lbs (79.1% of total volume), followed by off-site transfers at 20.9%. Between 2019 and 2023, reported totals increased by 45% - from 89 lbs to 129 lbs. The facility is operated under parent company Samuel Son & Co Ltd.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Samuel Advanced Fabrication a Div of Samuel Son & Co. has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332312
Total Releases
608 lbs
Chemicals Reported
4
Latest Report Year
2023

Compare this facility

See how Samuel Advanced Fabrication a Div of Samuel Son & Co. stacks up against nearby facilities and the typical reporter.

Total reported releases
Samuel Advanced Fabrication a Div of Samuel Son & Co.
608 lbs
Materion Ceramics Inc.
26.9K lbs

98% less than the comparison

Chemicals reported
Samuel Advanced Fabrication a Div of Samuel Son & Co.
4
Materion Ceramics Inc.
2

2.0× more than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Samuel Advanced Fabrication a Div of Samuel Son & Co. releases toxic chemicals into the environment. Total: 608 lbs.

Air Releases 481 lbs (79.1%)
Off-site Transfers 127 lbs (20.9%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 45% (89 lbs to 129 lbs).

Reported total releases by year

Samuel Advanced Fabrication a Div of Samuel Son & Co. - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 89 lbs 3
2020 127 lbs 4
2021 130 lbs 4
2022 133 lbs 4
2023 129 lbs 4

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 4 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Chromium 220 lbs -
Manganese 153 lbs -
Nickel 135 lbs Carcinogen
Copper 100 lbs -

Location

Coordinates
32.1392, -110.9348
ZIP Code
85706
EPA Facility ID
8570WCDNDS622ST

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Samuel Advanced Fabrication a Div of Samuel Son & Co. release?
Samuel Advanced Fabrication a Div of Samuel Son & Co. has reported releases of 4 chemicals to the EPA Toxic Release Inventory, totaling 608 lbs. 1 of these (25%) are classified as carcinogens.
What industry is Samuel Advanced Fabrication a Div of Samuel Son & Co. in?
Samuel Advanced Fabrication a Div of Samuel Son & Co. is classified under the "Fabricated Metals" industry (NAICS code 332312), located in Tucson, AZ.
How long has Samuel Advanced Fabrication a Div of Samuel Son & Co. reported to the TRI?
Samuel Advanced Fabrication a Div of Samuel Son & Co. has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Samuel Advanced Fabrication a Div of Samuel Son & Co. release toxic chemicals?
The primary release pathway for Samuel Advanced Fabrication a Div of Samuel Son & Co. is air releases, accounting for 79.1% of total releases (481 lbs). Secondary pathway: off-site transfers (20.9%).
Are emissions from Samuel Advanced Fabrication a Div of Samuel Son & Co. increasing or decreasing?
From 2019 to 2023, total releases increased by 45%, from 89 lbs to 129 lbs.
Is Samuel Advanced Fabrication a Div of Samuel Son & Co. a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Samuel Advanced Fabrication a Div of Samuel Son & Co. release carcinogens?
Yes, Samuel Advanced Fabrication a Div of Samuel Son & Co. reports 1 chemical classified as carcinogens, representing 25% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Samuel Advanced Fabrication a Div of Samuel Son & Co. are rising or falling over time. View trends
  • This facility ranks #14,517 of 25,986 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Arizona's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Arizona profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Samuel Advanced Fabrication a Div of Samuel Son & Co.. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.