EPA TRI Facility · Plastics and Rubber
Allied Molded Products LLC
Palmetto, FL
- Total releases
- 11.2K lbs
- Chemicals reported
- 1
- Carcinogens
- 1
- Primary pathway
- Air Releases
AIR Form-R mix
Allied Molded Products LLC: how the 11.2K lbs splits
11.2K lbs across all reported pathways
- Air Releases 11.2K lbs 100.0%
Allied Molded Products LLC's 11.2K lbs Form-R total is AIR - air releases is 100.0% of the bar. Off-site transfers stay separate from air, water, and land releases. Leading chemical by pounds: Styrene.
LIGHT volume AIR pathway CARC-HEAVY
Allied Molded Products LLC is an EPA Toxics Release Inventory reporter in Palmetto, FL, in the plastics and rubber sector. It reported 2.2K lbs of releases across 1 chemical in 2023, and 11.2K lbs in total across its 2019-2023 reporting years. That ranks 9,571 of 25,986 TRI facilities nationwide by cumulative reported pounds, counting each facility over however many years it has filed. In Florida's 659 reporting TRI sites, pounds #1 is not chemical-count #1. Allied Molded Products LLC is pounds #226 and chemical-count #384 at 11.2K lbs. Ascend Performance Materials Operations LLC leads reported pounds (116.3M lbs) at 27 chemicals (chemical-count #2). Duke Energy Florida Llc-Crystal River Power Plant leads chemical count at 31 chemicals (2.4M lbs, pounds #15). Pounds reported are not a measure of toxicity or health risk. Nearest other TRI reporters: Jupiter Marine International Inc.; Manatee Ready Mix Plant; Titan Florida - Ellenton Rmc Plant; Tropicana Manufacturing Co Inc. Similar-scale Plastics and Rubber peers outside Florida: Aristech Surfaces LLC; Polyfirst; Channell Rockwall Texas; Ddp Specialty Electronics Materials US Inc.. Largest disclosed chemicals by pounds: Styrene.
Allied Molded Products LLC stamps LIGHT volume with a dominant AIR pathway (100.0% air releases) across 1 chemical · 1 carcinogen-classified. Cumulative Form-R extract: 11.2K lbs (2019–2023). All figures are self-reported EPCRA §313 estimates, not measured stack emissions or a health-risk score. Scale peers include Aristech Surfaces LLC and Polyfirst.
Allied Molded Products LLC vs. every reporting TRI facility
Cumulative reported release pounds, with this facility marked in the national distribution
11K lbs Top 37% higher than 63% of 25,986 reporting TRI facilities
Each bar is a $1M-wide band; taller bars hold more reporting TRI facilities. The dashed line and filled bar mark this facility. Hover, focus, or tap a bar for its full count, share, and position.
Source U.S. Environmental Protection Agency, Toxics Release Inventory · 2023 reporting year
Allied Molded Products LLC: Styrene-led volume
Among the 1,504 Plastics and Rubber facilities in this database, Allied Molded Products LLC reports the 781st-largest volume (11.2K lbs). Its reported volume is concentrated rather than spread: Styrene alone is 100% of the total. Carcinogen-classified chemicals make up 100% of the reported pounds, not just of the chemical count. Scale peers outside Florida include Aristech Surfaces LLC and Polyfirst.
Concentrated means ≥60% of Allied Molded Products LLC's pounds in one chemical - here Styrene at 100%. Not a toxicity score.
Allied Molded Products LLC Form-R facts
Compare this facility
See how Allied Molded Products LLC stacks up against nearby facilities and the typical reporter.
87% less than the comparison
About the same as the comparison
Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.
How does this facility release toxic chemicals?
How Allied Molded Products LLC releases toxic chemicals into the environment. Total: 11.2K lbs.
Emissions Trend Summary
From 2019 to 2023, total releases decreased by 34% (3.4K lbs to 2.2K lbs).
Allied Molded Products LLC: annual Form-R pounds
LIGHT site · AIR pathway · TRI years 2019–2023
- 2019 0
- 2020 0
- 2021 0
- 2023 0
What this shows Allied Molded Products LLC year-over-year reported totals (decreased by 34% from 2019 to 2023). TRI figures are self-reported estimates and can swing with production, waste handling, and reporting changes, not only with controls. Lead chemical in the extract: Styrene.
| Year | Total | Chemicals |
|---|---|---|
| 2019 | 3.4K lbs | 1 |
| 2020 | 3.2K lbs | 1 |
| 2021 | 2.4K lbs | 1 |
| 2023 | 2.2K lbs | 1 |
Chemical Releases
Aggregated across all reporting years (2019–2023). 1 of 1 chemicals are carcinogens. Sorted by total release volume.
| Chemical | Total | Flags |
|---|---|---|
| Styrene | 11.2K lbs | Carcinogen |
Allied Molded Products LLC · AIR-pathway site
Nearest TRI Facilities to Allied Molded Products LLC
Closest other reporters in Florida - including Jupiter Marine International Inc., Manatee Ready Mix Plant, Titan Florida - Ellenton Rmc Plant, ordered by distance.
Showing 8 of 658 other reporting facilities in Florida.
Similar Plastics and Rubber Facilities
Other Plastics and Rubber facilities with similar total release volumes (±80%), outside Florida - e.g. Aristech Surfaces LLC, Polyfirst, Channell Rockwall Texas.
Compare beyond Florida
Nationwide peers by reported pounds & chemical count
Cross-state TRI reporters nearest Allied Molded Products LLC on cumulative reported pounds (11.2K lbs) and distinct chemical count (1). Release-pound peers include Coastal Chemical Co. LLC - Odessa - Tm, Alpha Assembly Solutions, Skolnik Industries. Chemical-count peers include Ecoelectrica LP, Planta Penuelas, Tallaboa Puerto Rico LLC. Neighborhoods are forced disjoint so each axis surfaces a different set of sites.
Similar reported release pounds
Nearest out-of-state reporters (≥1,000 lbs) by absolute TRI pounds, not same-industry or same-county neighbors.
- Coastal Chemical Co. LLC - Odessa - Tm Odessa, TX · Chemical Wholesalers 11.2K lbs reported
- Alpha Assembly Solutions Altoona, PA · Primary Metals 11.2K lbs reported
- Skolnik Industries Chicago, IL · Fabricated Metals 11.2K lbs reported
- Dfa Dairy Brands Fluid LLC DBA Purity Dairy Nashville, TN · Food 11.2K lbs reported
Similar chemical count
Nearest out-of-state reporters by distinct Form-R chemicals (deduped against the release-pound neighborhood).
About TRI Data
Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.
On this page the largest disclosed chemicals include Styrene; nearby reporters include Jupiter Marine International Inc.. Allied Molded Products LLC stamps LIGHT volume · AIR pathway · CARC-HEAVY carcinogen-lbs on this Form-R extract. Totals are self-reported estimates under EPCRA §313, not measured stack emissions or a health-risk score.
Use and verify this record
This Allied Molded Products LLC TRI extract (LIGHT · AIR · CARC-HEAVY · lead Styrene) joins EPA Form-R filings with facility identity - reported pounds, not a health-risk rating.
Allied Molded Products LLC totals are self-reported EPCRA §313 estimates for Palmetto, FL, latest year 2023. Form-R rows span 2019–2023 (4 years). NAICS 326199 · Plastics and Rubber. 0.9% of Manatee TRI pounds in this extract. Nearest ABS peer: Coastal Chemical Co. LLC - Odessa - Tm (Δ 1 lbs). Pounds ≠ exposure.
Allied Molded Products LLC stamps LIGHT volume · AIR pathway · CARC-HEAVY · lead Styrene. PlainEnviro renders this EPA Form-R extract from its pipeline; no figure is typed in by an editor. Corrections: editorial policy.
All federal data sources used on this page
- EPA Toxics Release Inventory (TRI) Basic Data Files - annual self-reported chemical-release filings. epa.gov
- EPA TRI Program reference - how chemicals and reported releases are counted. epa.gov
- EPA Facility Registry Service - facility location and identity. epa.gov
- EPA ECHO - regulatory and compliance context. epa.gov
- EPA Envirofacts - the EPA data warehouse exposing these datasets. epa.gov