EPA TRI Facility · Fabricated Metals

Paragon Medical - Warsaw Finishing Services

Warsaw, IN

Total releases
27.6K lbs
Chemicals reported
4
Carcinogens
1
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Paragon Medical - Warsaw Finishing Services has reported 27.6K lbs of toxic releases across 4 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 25% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 99% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#7,508 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Paragon Medical - Warsaw Finishing Services files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332813 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 27.6K lbs in cumulative toxic releases across 4 distinct chemicals, 1 of which (25%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 27.3K lbs (98.9% of total volume), followed by air releases at 1.1%. Between 2019 and 2023, reported totals decreased by 16% - from 6.7K lbs to 5.6K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Paragon Medical - Warsaw Finishing Services has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332813
Total Releases
27.6K lbs
Chemicals Reported
4
Latest Report Year
2023

Compare this facility

See how Paragon Medical - Warsaw Finishing Services stacks up against nearby facilities and the typical reporter.

Total reported releases
Paragon Medical - Warsaw Finishing Services
27.6K lbs
Uss Gary Works
77.4M lbs

100% less than the comparison

Chemicals reported
Paragon Medical - Warsaw Finishing Services
4
Uss Gary Works
36

89% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Paragon Medical - Warsaw Finishing Services releases toxic chemicals into the environment. Total: 27.6K lbs.

Off-site Transfers 27.3K lbs (98.9%)
Air Releases 290 lbs (1.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 16% (6.7K lbs to 5.6K lbs).

Reported total releases by year

Paragon Medical - Warsaw Finishing Services - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 6.7K lbs 4
2020 6.7K lbs 4
2021 5.1K lbs 4
2022 3.4K lbs 4
2023 5.6K lbs 4

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 4 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 23.8K lbs -
Chromium 2.8K lbs -
Nickel 628 lbs Carcinogen
Nitric acid 285 lbs -

Location

Coordinates
41.2582, -85.8523
ZIP Code
46580
EPA Facility ID
4658WPRGNM21NDE

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Paragon Medical - Warsaw Finishing Services release?
Paragon Medical - Warsaw Finishing Services has reported releases of 4 chemicals to the EPA Toxic Release Inventory, totaling 27.6K lbs. 1 of these (25%) are classified as carcinogens.
What industry is Paragon Medical - Warsaw Finishing Services in?
Paragon Medical - Warsaw Finishing Services is classified under the "Fabricated Metals" industry (NAICS code 332813), located in Warsaw, IN.
How long has Paragon Medical - Warsaw Finishing Services reported to the TRI?
Paragon Medical - Warsaw Finishing Services has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Paragon Medical - Warsaw Finishing Services release toxic chemicals?
The primary release pathway for Paragon Medical - Warsaw Finishing Services is off-site transfers, accounting for 98.9% of total releases (27.3K lbs). Secondary pathway: air releases (1.1%).
Are emissions from Paragon Medical - Warsaw Finishing Services increasing or decreasing?
From 2019 to 2023, total releases decreased by 16%, from 6.7K lbs to 5.6K lbs.
Is Paragon Medical - Warsaw Finishing Services a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Paragon Medical - Warsaw Finishing Services release carcinogens?
Yes, Paragon Medical - Warsaw Finishing Services reports 1 chemical classified as carcinogens, representing 25% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Paragon Medical - Warsaw Finishing Services are rising or falling over time. View trends
  • This facility ranks #7,508 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Indiana's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Indiana profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Paragon Medical - Warsaw Finishing Services. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.