EPA TRI Facility · Machinery

Ford Motor Co Dearborn Tool & Die Plant

Dearborn, MI · Parent: Ford Motor Co

Total releases
17.5K lbs
Chemicals reported
12
Carcinogens
4
Primary pathway
Air Releases
Verify at EPA TRI →

Ford Motor Co Dearborn Tool & Die Plant has reported 17.5K lbs of toxic releases across 12 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 4 are classified as carcinogens, representing 33% of the facility's chemical profile. The facility operates in the Machinery sector. The primary release pathway is air releases, accounting for 99% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#8,541 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Ford Motor Co Dearborn Tool & Die Plant files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 333514 (Machinery). Across 5 years of records spanning 2019–2023, the site has disclosed 17.5K lbs in cumulative toxic releases across 12 distinct chemicals, 4 of which (33%) carry a carcinogenic classification.

The dominant release pathway is air releases at 17.4K lbs (98.9% of total volume), followed by off-site transfers at 1.1%. Between 2019 and 2023, reported totals decreased by 9% - from 3.6K lbs to 3.2K lbs. The facility is operated under parent company Ford Motor Co.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Ford Motor Co Dearborn Tool & Die Plant has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Machinery
NAICS Code
333514
Total Releases
17.5K lbs
Chemicals Reported
12
Latest Report Year
2023

Compare this facility

See how Ford Motor Co Dearborn Tool & Die Plant stacks up against nearby facilities and the typical reporter.

Total reported releases
Ford Motor Co Dearborn Tool & Die Plant
17.5K lbs
Cleveland-Cliffs Steel Corp Dearborn Works
53.0M lbs

100% less than the comparison

Chemicals reported
Ford Motor Co Dearborn Tool & Die Plant
12
Cleveland-Cliffs Steel Corp Dearborn Works
17

29% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Ford Motor Co Dearborn Tool & Die Plant releases toxic chemicals into the environment. Total: 17.5K lbs.

Air Releases 17.4K lbs (98.9%)
Off-site Transfers 189 lbs (1.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 9% (3.6K lbs to 3.2K lbs).

Reported total releases by year

Ford Motor Co Dearborn Tool & Die Plant - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 3.6K lbs 10
2020 4.1K lbs 8
2021 3.3K lbs 6
2022 3.3K lbs 7
2023 3.2K lbs 10

Chemical Releases

Aggregated across all reporting years (2019–2023). 4 of 12 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Methanol 17.0K lbs -
Toluene 191 lbs -
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 189 lbs -
Ethylene glycol 80 lbs -
n-Butyl alcohol 20 lbs -
Ethylbenzene 20 lbs Carcinogen
Xylene (mixed isomers) 11 lbs -
Nickel 10 lbs Carcinogen
Methyl isobutyl ketone 4 lbs Carcinogen
Manganese 3 lbs -
Lead 0 lbs Carcinogen
Copper 0 lbs -

Location

Coordinates
42.3089, -83.1568
ZIP Code
48120
EPA Facility ID
48121FRDM43001M

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Ford Motor Co Dearborn Tool & Die Plant release?
Ford Motor Co Dearborn Tool & Die Plant has reported releases of 12 chemicals to the EPA Toxic Release Inventory, totaling 17.5K lbs. 4 of these (33%) are classified as carcinogens.
What industry is Ford Motor Co Dearborn Tool & Die Plant in?
Ford Motor Co Dearborn Tool & Die Plant is classified under the "Machinery" industry (NAICS code 333514), located in Dearborn, MI.
How long has Ford Motor Co Dearborn Tool & Die Plant reported to the TRI?
Ford Motor Co Dearborn Tool & Die Plant has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Ford Motor Co Dearborn Tool & Die Plant release toxic chemicals?
The primary release pathway for Ford Motor Co Dearborn Tool & Die Plant is air releases, accounting for 98.9% of total releases (17.4K lbs). Secondary pathway: off-site transfers (1.1%).
Are emissions from Ford Motor Co Dearborn Tool & Die Plant increasing or decreasing?
From 2019 to 2023, total releases decreased by 9%, from 3.6K lbs to 3.2K lbs.
Is Ford Motor Co Dearborn Tool & Die Plant a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Ford Motor Co Dearborn Tool & Die Plant release carcinogens?
Yes, Ford Motor Co Dearborn Tool & Die Plant reports 4 chemicals classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Ford Motor Co Dearborn Tool & Die Plant are rising or falling over time. View trends
  • This facility ranks #8,541 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Michigan's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Michigan profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Ford Motor Co Dearborn Tool & Die Plant. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.