EPA TRI Facility · Primary Metals

Scm Metal Products Inc

Research Triangle Park, NC

Total releases
110.1K lbs
Chemicals reported
11
Carcinogens
2
Primary pathway
Air Releases
Verify at EPA TRI →

Scm Metal Products Inc has reported 110.1K lbs of toxic releases across 11 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 2 are classified as carcinogens, representing 18% of the facility's chemical profile. The facility operates in the Primary Metals sector. The primary release pathway is air releases, accounting for 51% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#4,393 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Scm Metal Products Inc files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331420 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 110.1K lbs in cumulative toxic releases across 11 distinct chemicals, 2 of which (18%) carry a carcinogenic classification.

The dominant release pathway is air releases at 56.0K lbs (50.9% of total volume), followed by off-site transfers at 48.6%. Between 2019 and 2023, reported totals decreased by 8% - from 19.1K lbs to 17.6K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Scm Metal Products Inc has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331420
Total Releases
110.1K lbs
Chemicals Reported
11
Latest Report Year
2023

Compare this facility

See how Scm Metal Products Inc stacks up against nearby facilities and the typical reporter.

Total reported releases
Scm Metal Products Inc
110.1K lbs
Befesa Zinc Metal LLC
43.1M lbs

100% less than the comparison

Chemicals reported
Scm Metal Products Inc
11
Befesa Zinc Metal LLC
4

2.8× more than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Scm Metal Products Inc releases toxic chemicals into the environment. Total: 110.1K lbs.

Air Releases 56.0K lbs (50.9%)
Off-site Transfers 53.5K lbs (48.6%)
Water Discharges 577 lbs (0.5%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 8% (19.1K lbs to 17.6K lbs).

Reported total releases by year

Scm Metal Products Inc - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 19.1K lbs 9
2020 21.9K lbs 9
2021 21.7K lbs 9
2022 29.9K lbs 9
2023 17.6K lbs 9

Chemical Releases

Aggregated across all reporting years (2019–2023). 2 of 11 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Copper And Copper Compounds 95.8K lbs -
Chromium and Chromium Compounds(except for chromite ore mined in the Transvaal Region) 9.6K lbs -
Chromium compounds (except for chromite ore mined in the Transvaal Region) 3.3K lbs -
Lead 843 lbs Carcinogen
Manganese And Manganese Compounds 384 lbs -
Manganese compounds 88 lbs -
Antimony 85 lbs -
Zinc compounds 35 lbs -
Certain glycol ethers 0 lbs -
Ethylene glycol 0 lbs -
Nickel 0 lbs Carcinogen

Location

Coordinates
35.9314, -78.8497
ZIP Code
27709
EPA Facility ID
27709SCMMT2601W

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Scm Metal Products Inc release?
Scm Metal Products Inc has reported releases of 11 chemicals to the EPA Toxic Release Inventory, totaling 110.1K lbs. 2 of these (18%) are classified as carcinogens.
What industry is Scm Metal Products Inc in?
Scm Metal Products Inc is classified under the "Primary Metals" industry (NAICS code 331420), located in Research Triangle Park, NC.
How long has Scm Metal Products Inc reported to the TRI?
Scm Metal Products Inc has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Scm Metal Products Inc release toxic chemicals?
The primary release pathway for Scm Metal Products Inc is air releases, accounting for 50.9% of total releases (56.0K lbs). Secondary pathway: off-site transfers (48.6%).
Are emissions from Scm Metal Products Inc increasing or decreasing?
From 2019 to 2023, total releases decreased by 8%, from 19.1K lbs to 17.6K lbs.
Is Scm Metal Products Inc a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Scm Metal Products Inc release carcinogens?
Yes, Scm Metal Products Inc reports 2 chemicals classified as carcinogens, representing 18% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Scm Metal Products Inc are rising or falling over time. View trends
  • This facility ranks #4,393 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check North Carolina's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View North Carolina profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Scm Metal Products Inc. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.