EPA TRI Facility · Fabricated Metals

Plasman Cleveland Manufacturing

Cleveland, OH

Total releases
321.3K lbs
Chemicals reported
7
Carcinogens
2
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Plasman Cleveland Manufacturing has reported 321.3K lbs of toxic releases across 7 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 2 are classified as carcinogens, representing 29% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#2,492 of 25,902 TRI facilities nationwide by total reported releases - among the top 9.6% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk.

Plasman Cleveland Manufacturing files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332813 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 321.3K lbs in cumulative toxic releases across 7 distinct chemicals, 2 of which (29%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 321.2K lbs (100.0% of total volume), followed by air releases at 0.0%. Between 2019 and 2023, reported totals decreased by 78% - from 169.0K lbs to 37.7K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Plasman Cleveland Manufacturing has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332813
Total Releases
321.3K lbs
Chemicals Reported
7
Latest Report Year
2023

Compare this facility

See how Plasman Cleveland Manufacturing stacks up against nearby facilities and the typical reporter.

Total reported releases
Plasman Cleveland Manufacturing
321.3K lbs
Ineos Nitriles USA LLC
42.4M lbs

99% less than the comparison

Chemicals reported
Plasman Cleveland Manufacturing
7
Ineos Nitriles USA LLC
31

77% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Plasman Cleveland Manufacturing releases toxic chemicals into the environment. Total: 321.3K lbs.

Off-site Transfers 321.2K lbs (100.0%)
Air Releases 158 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 78% (169.0K lbs to 37.7K lbs).

Reported total releases by year

Plasman Cleveland Manufacturing - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 169.0K lbs 6
2020 40.4K lbs 6
2021 36.2K lbs 7
2022 38.0K lbs 7
2023 37.7K lbs 7

Chemical Releases

Aggregated across all reporting years (2019–2023). 2 of 7 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 213.3K lbs -
Chromium 36.3K lbs -
Nickel 28.1K lbs Carcinogen
Ammonia 23.0K lbs -
Copper 20.6K lbs -
Nitric acid 50 lbs -
Lead 4 lbs Carcinogen

Location

Coordinates
41.4702, -81.7728
ZIP Code
44111
EPA Facility ID
44111BRTPL3000W

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Plasman Cleveland Manufacturing release?
Plasman Cleveland Manufacturing has reported releases of 7 chemicals to the EPA Toxic Release Inventory, totaling 321.3K lbs. 2 of these (29%) are classified as carcinogens.
What industry is Plasman Cleveland Manufacturing in?
Plasman Cleveland Manufacturing is classified under the "Fabricated Metals" industry (NAICS code 332813), located in Cleveland, OH.
How long has Plasman Cleveland Manufacturing reported to the TRI?
Plasman Cleveland Manufacturing has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Plasman Cleveland Manufacturing release toxic chemicals?
The primary release pathway for Plasman Cleveland Manufacturing is off-site transfers, accounting for 100.0% of total releases (321.2K lbs). Secondary pathway: air releases (0.0%).
Are emissions from Plasman Cleveland Manufacturing increasing or decreasing?
From 2019 to 2023, total releases decreased by 78%, from 169.0K lbs to 37.7K lbs.
Is Plasman Cleveland Manufacturing a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Plasman Cleveland Manufacturing release carcinogens?
Yes, Plasman Cleveland Manufacturing reports 2 chemicals classified as carcinogens, representing 29% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Plasman Cleveland Manufacturing are rising or falling over time. View trends
  • This facility ranks #2,492 of 25,902 TRI facilities nationwide by total reported releases - among the top 9.6% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Ohio's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Ohio profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Plasman Cleveland Manufacturing. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.