EPA TRI Facility · Primary Metals

Bridesburg Foundry Co

Whitehall, PA

Total releases
574 lbs
Chemicals reported
4
Carcinogens
1
Primary pathway
Air Releases
Verify at EPA TRI →

Bridesburg Foundry Co has reported 574 lbs of toxic releases across 4 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 25% of the facility's chemical profile. The facility operates in the Primary Metals sector. The primary release pathway is air releases, accounting for 74% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#14,601 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Bridesburg Foundry Co files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331529 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 574 lbs in cumulative toxic releases across 4 distinct chemicals, 1 of which (25%) carry a carcinogenic classification.

The dominant release pathway is air releases at 425 lbs (74.1% of total volume), followed by off-site transfers at 23.2%. Between 2019 and 2023, reported totals increased by 4% - from 92 lbs to 96 lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Bridesburg Foundry Co has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331529
Total Releases
574 lbs
Chemicals Reported
4
Latest Report Year
2023

Compare this facility

See how Bridesburg Foundry Co stacks up against nearby facilities and the typical reporter.

Total reported releases
Bridesburg Foundry Co
574 lbs
Max Environmental -- Yukon Facility
34.8M lbs

100% less than the comparison

Chemicals reported
Bridesburg Foundry Co
4
Max Environmental -- Yukon Facility
18

78% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Bridesburg Foundry Co releases toxic chemicals into the environment. Total: 574 lbs.

Air Releases 425 lbs (74.1%)
Off-site Transfers 133 lbs (23.2%)
Water Discharges 15 lbs (2.7%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 4% (92 lbs to 96 lbs).

Reported total releases by year

Bridesburg Foundry Co - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 92 lbs 3
2020 112 lbs 3
2021 129 lbs 3
2022 145 lbs 3
2023 96 lbs 3

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 4 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Copper 443 lbs -
Lead compounds 78 lbs -
Nickel 37 lbs Carcinogen
Lead And Lead Compounds 16 lbs -

Location

Coordinates
40.6370, -75.4672
ZIP Code
18052
EPA Facility ID
18052BRDSBFRONT

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Bridesburg Foundry Co release?
Bridesburg Foundry Co has reported releases of 4 chemicals to the EPA Toxic Release Inventory, totaling 574 lbs. 1 of these (25%) are classified as carcinogens.
What industry is Bridesburg Foundry Co in?
Bridesburg Foundry Co is classified under the "Primary Metals" industry (NAICS code 331529), located in Whitehall, PA.
How long has Bridesburg Foundry Co reported to the TRI?
Bridesburg Foundry Co has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Bridesburg Foundry Co release toxic chemicals?
The primary release pathway for Bridesburg Foundry Co is air releases, accounting for 74.1% of total releases (425 lbs). Secondary pathway: off-site transfers (23.2%).
Are emissions from Bridesburg Foundry Co increasing or decreasing?
From 2019 to 2023, total releases increased by 4%, from 92 lbs to 96 lbs.
Is Bridesburg Foundry Co a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Bridesburg Foundry Co release carcinogens?
Yes, Bridesburg Foundry Co reports 1 chemical classified as carcinogens, representing 25% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Bridesburg Foundry Co are rising or falling over time. View trends
  • This facility ranks #14,601 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Pennsylvania's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Pennsylvania profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Bridesburg Foundry Co. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.