EPA TRI Facility · Machinery

Curtiss Wright Electro Mech Corp

Cheswick, PA · Parent: Curtiss-Wright Corp

Total releases
7.7K lbs
Chemicals reported
3
Carcinogens
1
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Curtiss Wright Electro Mech Corp has reported 7.7K lbs of toxic releases across 3 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 33% of the facility's chemical profile. The facility operates in the Machinery sector. The primary release pathway is off-site transfers, accounting for 96% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#10,339 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Curtiss Wright Electro Mech Corp files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 333999 (Machinery). Across 5 years of records spanning 2019–2023, the site has disclosed 7.7K lbs in cumulative toxic releases across 3 distinct chemicals, 1 of which (33%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 7.4K lbs (95.7% of total volume), followed by air releases at 4.3%. Between 2019 and 2023, reported totals increased by 130% - from 921 lbs to 2.1K lbs. The facility is operated under parent company Curtiss-Wright Corp.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Curtiss Wright Electro Mech Corp has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Machinery
NAICS Code
333999
Total Releases
7.7K lbs
Chemicals Reported
3
Latest Report Year
2023

Compare this facility

See how Curtiss Wright Electro Mech Corp stacks up against nearby facilities and the typical reporter.

Total reported releases
Curtiss Wright Electro Mech Corp
7.7K lbs
Max Environmental -- Yukon Facility
34.8M lbs

100% less than the comparison

Chemicals reported
Curtiss Wright Electro Mech Corp
3
Max Environmental -- Yukon Facility
18

83% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Curtiss Wright Electro Mech Corp releases toxic chemicals into the environment. Total: 7.7K lbs.

Off-site Transfers 7.4K lbs (95.7%)
Air Releases 336 lbs (4.3%)
Water Discharges 0 lbs (<0.1%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 130% (921 lbs to 2.1K lbs).

Reported total releases by year

Curtiss Wright Electro Mech Corp - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 921 lbs 3
2020 0 lbs 3
2021 2.5K lbs 3
2022 2.2K lbs 3
2023 2.1K lbs 3

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 3 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nickel 7.7K lbs Carcinogen
Chromium 0 lbs -
Copper 0 lbs -

Location

Coordinates
40.5511, -79.8091
ZIP Code
15024
EPA Facility ID
1502WCRTSS1WRIG

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Curtiss Wright Electro Mech Corp release?
Curtiss Wright Electro Mech Corp has reported releases of 3 chemicals to the EPA Toxic Release Inventory, totaling 7.7K lbs. 1 of these (33%) are classified as carcinogens.
What industry is Curtiss Wright Electro Mech Corp in?
Curtiss Wright Electro Mech Corp is classified under the "Machinery" industry (NAICS code 333999), located in Cheswick, PA.
How long has Curtiss Wright Electro Mech Corp reported to the TRI?
Curtiss Wright Electro Mech Corp has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Curtiss Wright Electro Mech Corp release toxic chemicals?
The primary release pathway for Curtiss Wright Electro Mech Corp is off-site transfers, accounting for 95.7% of total releases (7.4K lbs). Secondary pathway: air releases (4.3%).
Are emissions from Curtiss Wright Electro Mech Corp increasing or decreasing?
From 2019 to 2023, total releases increased by 130%, from 921 lbs to 2.1K lbs.
Is Curtiss Wright Electro Mech Corp a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Curtiss Wright Electro Mech Corp release carcinogens?
Yes, Curtiss Wright Electro Mech Corp reports 1 chemical classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Curtiss Wright Electro Mech Corp are rising or falling over time. View trends
  • This facility ranks #10,339 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Pennsylvania's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Pennsylvania profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Curtiss Wright Electro Mech Corp. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.