EPA TRI Facility · Fabricated Metals

Advanced Plating Technologies

Milwaukee, WI

Total releases
100.2K lbs
Chemicals reported
8
Carcinogens
3
Primary pathway
Air Releases
Verify at EPA TRI →

Advanced Plating Technologies has reported 100.2K lbs of toxic releases across 8 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 3 are classified as carcinogens, representing 38% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is air releases, accounting for 82% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#4,579 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Advanced Plating Technologies files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332813 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 100.2K lbs in cumulative toxic releases across 8 distinct chemicals, 3 of which (38%) carry a carcinogenic classification.

The dominant release pathway is air releases at 82.4K lbs (82.2% of total volume), followed by off-site transfers at 17.8%. Between 2019 and 2023, reported totals decreased by 16% - from 16.9K lbs to 14.2K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Advanced Plating Technologies has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332813
Total Releases
100.2K lbs
Chemicals Reported
8
Latest Report Year
2023

Compare this facility

See how Advanced Plating Technologies stacks up against nearby facilities and the typical reporter.

Total reported releases
Advanced Plating Technologies
100.2K lbs
Mullins Cheese Inc
11.2M lbs

99% less than the comparison

Chemicals reported
Advanced Plating Technologies
8
Mullins Cheese Inc
3

2.7× more than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Advanced Plating Technologies releases toxic chemicals into the environment. Total: 100.2K lbs.

Air Releases 82.4K lbs (82.2%)
Off-site Transfers 17.8K lbs (17.8%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 16% (16.9K lbs to 14.2K lbs).

Reported total releases by year

Advanced Plating Technologies - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 16.9K lbs 7
2020 20.3K lbs 7
2021 23.2K lbs 7
2022 25.7K lbs 7
2023 14.2K lbs 7

Chemical Releases

Aggregated across all reporting years (2019–2023). 3 of 8 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
1-Bromopropane 80.0K lbs Carcinogen
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 11.2K lbs -
Nitric acid 5.3K lbs -
Nickel And Nickel Compounds 1.9K lbs Carcinogen
Cyanide compounds 807 lbs -
Nickel compounds 740 lbs Carcinogen
Copper And Copper Compounds 123 lbs -
Lead And Lead Compounds 115 lbs -

Location

Coordinates
43.0498, -87.9159
ZIP Code
53212
EPA Facility ID
53212RTSTC428WV

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Advanced Plating Technologies release?
Advanced Plating Technologies has reported releases of 8 chemicals to the EPA Toxic Release Inventory, totaling 100.2K lbs. 3 of these (38%) are classified as carcinogens.
What industry is Advanced Plating Technologies in?
Advanced Plating Technologies is classified under the "Fabricated Metals" industry (NAICS code 332813), located in Milwaukee, WI.
How long has Advanced Plating Technologies reported to the TRI?
Advanced Plating Technologies has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Advanced Plating Technologies release toxic chemicals?
The primary release pathway for Advanced Plating Technologies is air releases, accounting for 82.2% of total releases (82.4K lbs). Secondary pathway: off-site transfers (17.8%).
Are emissions from Advanced Plating Technologies increasing or decreasing?
From 2019 to 2023, total releases decreased by 16%, from 16.9K lbs to 14.2K lbs.
Is Advanced Plating Technologies a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Advanced Plating Technologies release carcinogens?
Yes, Advanced Plating Technologies reports 3 chemicals classified as carcinogens, representing 38% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Advanced Plating Technologies are rising or falling over time. View trends
  • This facility ranks #4,579 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Wisconsin's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Wisconsin profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Advanced Plating Technologies. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.