EPA TRI Facility · Fabricated Metals

Federal Tool & Engineering

West Bend, WI · Parent: American Consolidated Metals

Total releases
96 lbs
Chemicals reported
2
Carcinogens
1
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Federal Tool & Engineering has reported 96 lbs of toxic releases across 2 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 50% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 95% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#16,609 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Federal Tool & Engineering files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332119 (Fabricated Metals). Across 2 years of records spanning 2022–2023, the site has disclosed 96 lbs in cumulative toxic releases across 2 distinct chemicals, 1 of which (50%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 91 lbs (95.4% of total volume), followed by air releases at 4.6%. Between 2022 and 2023, reported totals decreased by 46% - from 62 lbs to 34 lbs. The facility is operated under parent company American Consolidated Metals.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Federal Tool & Engineering has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332119
Total Releases
96 lbs
Chemicals Reported
2
Latest Report Year
2023

Compare this facility

See how Federal Tool & Engineering stacks up against nearby facilities and the typical reporter.

Total reported releases
Federal Tool & Engineering
96 lbs
Mullins Cheese Inc
11.2M lbs

100% less than the comparison

Chemicals reported
Federal Tool & Engineering
2
Mullins Cheese Inc
3

33% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Federal Tool & Engineering releases toxic chemicals into the environment. Total: 96 lbs.

Off-site Transfers 91 lbs (95.4%)
Air Releases 4 lbs (4.6%)
View 2-Year Emissions Trend →

Emissions Trend Summary

From 2022 to 2023, total releases decreased by 46% (62 lbs to 34 lbs).

Reported total releases by year

Federal Tool & Engineering - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2022 62 lbs 2
2023 34 lbs 2

Chemical Releases

Aggregated across all reporting years (2022–2023). 1 of 2 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Chromium 65 lbs -
Nickel 30 lbs Carcinogen

Location

Coordinates
43.3933, -88.1709
ZIP Code
53095
EPA Facility ID
5309WFDRLT215ST

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Federal Tool & Engineering release?
Federal Tool & Engineering has reported releases of 2 chemicals to the EPA Toxic Release Inventory, totaling 96 lbs. 1 of these (50%) are classified as carcinogens.
What industry is Federal Tool & Engineering in?
Federal Tool & Engineering is classified under the "Fabricated Metals" industry (NAICS code 332119), located in West Bend, WI.
How long has Federal Tool & Engineering reported to the TRI?
Federal Tool & Engineering has EPA Toxic Release Inventory data spanning 2 years, from 2022 to 2023.
How does Federal Tool & Engineering release toxic chemicals?
The primary release pathway for Federal Tool & Engineering is off-site transfers, accounting for 95.4% of total releases (91 lbs). Secondary pathway: air releases (4.6%).
Are emissions from Federal Tool & Engineering increasing or decreasing?
From 2022 to 2023, total releases decreased by 46%, from 62 lbs to 34 lbs.
Is Federal Tool & Engineering a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Federal Tool & Engineering release carcinogens?
Yes, Federal Tool & Engineering reports 1 chemical classified as carcinogens, representing 50% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Federal Tool & Engineering are rising or falling over time. View trends
  • This facility ranks #16,609 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Wisconsin's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Wisconsin profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Federal Tool & Engineering. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.