EPA TRI Facility · Fabricated Metals

Metal Finishing Technologies LLC

Forestville, CT

Total releases
207.1K lbs
Chemicals reported
6
Carcinogens
2
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Metal Finishing Technologies LLC has reported 207.1K lbs of toxic releases across 6 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 2 are classified as carcinogens, representing 33% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 99% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#3,182 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Metal Finishing Technologies LLC files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332813 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 207.1K lbs in cumulative toxic releases across 6 distinct chemicals, 2 of which (33%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 204.7K lbs (98.8% of total volume), followed by air releases at 1.2%. Between 2019 and 2023, reported totals increased by 42% - from 17.7K lbs to 25.0K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Metal Finishing Technologies LLC has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332813
Total Releases
207.1K lbs
Chemicals Reported
6
Latest Report Year
2023

Compare this facility

See how Metal Finishing Technologies LLC stacks up against nearby facilities and the typical reporter.

Total reported releases
Metal Finishing Technologies LLC
207.1K lbs
Clean Harbors of Connecticut Inc
1.5M lbs

86% less than the comparison

Chemicals reported
Metal Finishing Technologies LLC
6
Clean Harbors of Connecticut Inc
15

60% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Metal Finishing Technologies LLC releases toxic chemicals into the environment. Total: 207.1K lbs.

Off-site Transfers 204.7K lbs (98.8%)
Air Releases 2.5K lbs (1.2%)
Water Discharges 9 lbs (<0.1%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 42% (17.7K lbs to 25.0K lbs).

Reported total releases by year

Metal Finishing Technologies LLC - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 17.7K lbs 5
2020 96.5K lbs 5
2021 22.9K lbs 5
2022 45.1K lbs 5
2023 25.0K lbs 5

Chemical Releases

Aggregated across all reporting years (2019–2023). 2 of 6 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nickel compounds 105.4K lbs Carcinogen
Zinc compounds 57.6K lbs -
Nickel And Nickel Compounds 24.5K lbs Carcinogen
Nitric acid 7.0K lbs -
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 6.8K lbs -
Hydrochloric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 5.9K lbs -

Location

Coordinates
41.6763, -72.8899
ZIP Code
06010
EPA Facility ID
06010MTLFN60WOO

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Metal Finishing Technologies LLC release?
Metal Finishing Technologies LLC has reported releases of 6 chemicals to the EPA Toxic Release Inventory, totaling 207.1K lbs. 2 of these (33%) are classified as carcinogens.
What industry is Metal Finishing Technologies LLC in?
Metal Finishing Technologies LLC is classified under the "Fabricated Metals" industry (NAICS code 332813), located in Forestville, CT.
How long has Metal Finishing Technologies LLC reported to the TRI?
Metal Finishing Technologies LLC has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Metal Finishing Technologies LLC release toxic chemicals?
The primary release pathway for Metal Finishing Technologies LLC is off-site transfers, accounting for 98.8% of total releases (204.7K lbs). Secondary pathway: air releases (1.2%).
Are emissions from Metal Finishing Technologies LLC increasing or decreasing?
From 2019 to 2023, total releases increased by 42%, from 17.7K lbs to 25.0K lbs.
Is Metal Finishing Technologies LLC a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Metal Finishing Technologies LLC release carcinogens?
Yes, Metal Finishing Technologies LLC reports 2 chemicals classified as carcinogens, representing 33% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Metal Finishing Technologies LLC are rising or falling over time. View trends
  • This facility ranks #3,182 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Connecticut's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Connecticut profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Metal Finishing Technologies LLC. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.