EPA TRI Facility · Primary Metals

Milward Alloys Inc

Lockport, NY

Total releases
2.8K lbs
Chemicals reported
5
Carcinogens
1
Primary pathway
Air Releases
Verify at EPA TRI →

Milward Alloys Inc has reported 2.8K lbs of toxic releases across 5 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 1 is classified as carcinogen, representing 20% of the facility's chemical profile. The facility operates in the Primary Metals sector. The primary release pathway is air releases, accounting for 100% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#12,265 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Milward Alloys Inc files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 331420 (Primary Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 2.8K lbs in cumulative toxic releases across 5 distinct chemicals, 1 of which (20%) carry a carcinogenic classification.

The dominant release pathway is air releases at 2.8K lbs (100.0% of total volume). Between 2019 and 2023, reported totals increased by 50% - from 500 lbs to 750 lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Milward Alloys Inc has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Primary Metals
NAICS Code
331420
Total Releases
2.8K lbs
Chemicals Reported
5
Latest Report Year
2023

Compare this facility

See how Milward Alloys Inc stacks up against nearby facilities and the typical reporter.

Total reported releases
Milward Alloys Inc
2.8K lbs
St Lawrence Zinc Co Balmat 4 Mine & Mill
9.7M lbs

100% less than the comparison

Chemicals reported
Milward Alloys Inc
5
St Lawrence Zinc Co Balmat 4 Mine & Mill
10

50% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Milward Alloys Inc releases toxic chemicals into the environment. Total: 2.8K lbs.

Air Releases 2.8K lbs (100.0%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 50% (500 lbs to 750 lbs).

Reported total releases by year

Milward Alloys Inc - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 500 lbs 5
2020 500 lbs 5
2021 505 lbs 5
2022 500 lbs 5
2023 750 lbs 2

Chemical Releases

Aggregated across all reporting years (2019–2023). 1 of 5 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Copper 1.5K lbs -
Phosphorus (yellow or white) 1.3K lbs -
Manganese 0 lbs -
Chromium 0 lbs -
Beryllium 0 lbs Carcinogen

Location

Coordinates
43.1850, -78.6969
ZIP Code
14094
EPA Facility ID
14094MLWRD500MI

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Milward Alloys Inc release?
Milward Alloys Inc has reported releases of 5 chemicals to the EPA Toxic Release Inventory, totaling 2.8K lbs. 1 of these (20%) are classified as carcinogens.
What industry is Milward Alloys Inc in?
Milward Alloys Inc is classified under the "Primary Metals" industry (NAICS code 331420), located in Lockport, NY.
How long has Milward Alloys Inc reported to the TRI?
Milward Alloys Inc has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Milward Alloys Inc release toxic chemicals?
The primary release pathway for Milward Alloys Inc is air releases, accounting for 100.0% of total releases (2.8K lbs).
Are emissions from Milward Alloys Inc increasing or decreasing?
From 2019 to 2023, total releases increased by 50%, from 500 lbs to 750 lbs.
Is Milward Alloys Inc a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Milward Alloys Inc release carcinogens?
Yes, Milward Alloys Inc reports 1 chemical classified as carcinogens, representing 20% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Milward Alloys Inc are rising or falling over time. View trends
  • This facility ranks #12,265 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check New York's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View New York profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Milward Alloys Inc. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.