EPA TRI Facility · Computers and Electronic Products

Denso Manufacturing Tennessee Inc

Maryville, TN · Parent: Denso International America Inc

Total releases
60.4K lbs
Chemicals reported
8
Carcinogens
3
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Denso Manufacturing Tennessee Inc has reported 60.4K lbs of toxic releases across 8 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 3 are classified as carcinogens, representing 38% of the facility's chemical profile. The facility operates in the Computers and Electronic Products sector. The primary release pathway is off-site transfers, accounting for 57% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#5,703 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Denso Manufacturing Tennessee Inc files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 334519 (Computers and Electronic Products). Across 5 years of records spanning 2019–2023, the site has disclosed 60.4K lbs in cumulative toxic releases across 8 distinct chemicals, 3 of which (38%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 34.6K lbs (57.3% of total volume), followed by air releases at 42.7%. Between 2019 and 2023, reported totals decreased by 83% - from 23.0K lbs to 3.9K lbs. The facility is operated under parent company Denso International America Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Denso Manufacturing Tennessee Inc has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Computers and Electronic Products
NAICS Code
334519
Total Releases
60.4K lbs
Chemicals Reported
8
Latest Report Year
2023

Compare this facility

See how Denso Manufacturing Tennessee Inc stacks up against nearby facilities and the typical reporter.

Total reported releases
Denso Manufacturing Tennessee Inc
60.4K lbs
Nyrstar Clarksville Inc
72.9M lbs

100% less than the comparison

Chemicals reported
Denso Manufacturing Tennessee Inc
8
Nyrstar Clarksville Inc
13

38% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Denso Manufacturing Tennessee Inc releases toxic chemicals into the environment. Total: 60.4K lbs.

Off-site Transfers 34.6K lbs (57.3%)
Air Releases 25.8K lbs (42.7%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 83% (23.0K lbs to 3.9K lbs).

Reported total releases by year

Denso Manufacturing Tennessee Inc - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 23.0K lbs 7
2020 16.8K lbs 6
2021 9.7K lbs 7
2022 7.1K lbs 7
2023 3.9K lbs 7

Chemical Releases

Aggregated across all reporting years (2019–2023). 3 of 8 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Zinc (fume or dust) 55.0K lbs -
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 2.3K lbs -
Lead 2.0K lbs Carcinogen
Copper 637 lbs -
Manganese 373 lbs -
Nickel 86 lbs Carcinogen
Zinc compounds 0 lbs -
1-Bromopropane 0 lbs Carcinogen

Location

Coordinates
35.7616, -84.0086
ZIP Code
37801
EPA Facility ID
37801NPPND1720R

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Denso Manufacturing Tennessee Inc release?
Denso Manufacturing Tennessee Inc has reported releases of 8 chemicals to the EPA Toxic Release Inventory, totaling 60.4K lbs. 3 of these (38%) are classified as carcinogens.
What industry is Denso Manufacturing Tennessee Inc in?
Denso Manufacturing Tennessee Inc is classified under the "Computers and Electronic Products" industry (NAICS code 334519), located in Maryville, TN.
How long has Denso Manufacturing Tennessee Inc reported to the TRI?
Denso Manufacturing Tennessee Inc has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Denso Manufacturing Tennessee Inc release toxic chemicals?
The primary release pathway for Denso Manufacturing Tennessee Inc is off-site transfers, accounting for 57.3% of total releases (34.6K lbs). Secondary pathway: air releases (42.7%).
Are emissions from Denso Manufacturing Tennessee Inc increasing or decreasing?
From 2019 to 2023, total releases decreased by 83%, from 23.0K lbs to 3.9K lbs.
Is Denso Manufacturing Tennessee Inc a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Denso Manufacturing Tennessee Inc release carcinogens?
Yes, Denso Manufacturing Tennessee Inc reports 3 chemicals classified as carcinogens, representing 38% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Denso Manufacturing Tennessee Inc are rising or falling over time. View trends
  • This facility ranks #5,703 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Tennessee's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Tennessee profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Denso Manufacturing Tennessee Inc. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.