EPA TRI Facility · Chemicals

Plastics Engineering Co

Sheboygan, WI

Total releases
219.7K lbs
Chemicals reported
9
Carcinogens
4
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Plastics Engineering Co has reported 219.7K lbs of toxic releases across 9 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 4 are classified as carcinogens, representing 44% of the facility's chemical profile. The facility operates in the Chemicals sector. The primary release pathway is off-site transfers, accounting for 90% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#3,083 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk.

Plastics Engineering Co files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 325211 (Chemicals). Across 5 years of records spanning 2019–2023, the site has disclosed 219.7K lbs in cumulative toxic releases across 9 distinct chemicals, 4 of which (44%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 197.9K lbs (90.1% of total volume), followed by air releases at 9.8%. Between 2019 and 2023, reported totals decreased by 76% - from 110.2K lbs to 26.6K lbs.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Plastics Engineering Co has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Chemicals
NAICS Code
325211
Total Releases
219.7K lbs
Chemicals Reported
9
Latest Report Year
2023

Compare this facility

See how Plastics Engineering Co stacks up against nearby facilities and the typical reporter.

Total reported releases
Plastics Engineering Co
219.7K lbs
Mullins Cheese Inc
11.2M lbs

98% less than the comparison

Chemicals reported
Plastics Engineering Co
9
Mullins Cheese Inc
3

3.0× more than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Plastics Engineering Co releases toxic chemicals into the environment. Total: 219.7K lbs.

Off-site Transfers 197.9K lbs (90.1%)
Air Releases 21.5K lbs (9.8%)
Water Discharges 273 lbs (0.1%)
Land Disposal 0 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases decreased by 76% (110.2K lbs to 26.6K lbs).

Reported total releases by year

Plastics Engineering Co - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 110.2K lbs 9
2020 26.9K lbs 9
2021 27.4K lbs 9
2022 28.7K lbs 8
2023 26.6K lbs 8

Chemical Releases

Aggregated across all reporting years (2019–2023). 4 of 9 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Phenol 184.9K lbs -
Zinc compounds 11.8K lbs -
Formaldehyde 10.1K lbs Carcinogen
Methanol 7.0K lbs -
Styrene 4.5K lbs Carcinogen
Ethylene glycol 912 lbs -
Aniline 426 lbs Carcinogen
o-Cresol 124 lbs -
Polycyclic aromatic compounds 0 lbs Carcinogen

Location

Coordinates
43.7753, -87.7248
ZIP Code
53083
EPA Facility ID
53083PLSTC2732N

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Plastics Engineering Co release?
Plastics Engineering Co has reported releases of 9 chemicals to the EPA Toxic Release Inventory, totaling 219.7K lbs. 4 of these (44%) are classified as carcinogens.
What industry is Plastics Engineering Co in?
Plastics Engineering Co is classified under the "Chemicals" industry (NAICS code 325211), located in Sheboygan, WI.
How long has Plastics Engineering Co reported to the TRI?
Plastics Engineering Co has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Plastics Engineering Co release toxic chemicals?
The primary release pathway for Plastics Engineering Co is off-site transfers, accounting for 90.1% of total releases (197.9K lbs). Secondary pathway: air releases (9.8%).
Are emissions from Plastics Engineering Co increasing or decreasing?
From 2019 to 2023, total releases decreased by 76%, from 110.2K lbs to 26.6K lbs.
Is Plastics Engineering Co a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Plastics Engineering Co release carcinogens?
Yes, Plastics Engineering Co reports 4 chemicals classified as carcinogens, representing 44% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Plastics Engineering Co are rising or falling over time. View trends
  • This facility ranks #3,083 of 25,902 TRI facilities nationwide by total reported releases. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Wisconsin's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Wisconsin profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Plastics Engineering Co. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.