EPA TRI Facility · Fabricated Metals

Snap-On Tools Co

Elizabethton, TN · Parent: Snap-On Inc

Total releases
842.7K lbs
Chemicals reported
8
Carcinogens
2
Primary pathway
Off-site Transfers
Verify at EPA TRI →

Snap-On Tools Co has reported 842.7K lbs of toxic releases across 8 chemicals to the EPA Toxic Release Inventory, based on annual facility disclosures from 2019 through 2023. Of the chemicals reported, 2 are classified as carcinogens, representing 25% of the facility's chemical profile. The facility operates in the Fabricated Metals sector. The primary release pathway is off-site transfers, accounting for 97% of total releases. All release data shown below is self-reported to the EPA under the Emergency Planning and Community Right-to-Know Act (EPCRA) Section 313.

#1,442 of 25,902 TRI facilities nationwide by total reported releases - among the top 5.6% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk.

Snap-On Tools Co files annual Form R disclosures to the EPA Toxics Release Inventory under EPCRA Section 313, classified under NAICS 332216 (Fabricated Metals). Across 5 years of records spanning 2019–2023, the site has disclosed 842.7K lbs in cumulative toxic releases across 8 distinct chemicals, 2 of which (25%) carry a carcinogenic classification.

The dominant release pathway is off-site transfers at 821.0K lbs (97.4% of total volume), followed by air releases at 2.6%. Between 2019 and 2023, reported totals increased by 25% - from 86.6K lbs to 107.9K lbs. The facility is operated under parent company Snap-On Inc.

TRI Form R values are self-reported estimates, not measured stack emissions, and treat every pound of reported chemical equally regardless of toxicity. Inclusion in the TRI database does not establish a health risk to nearby residents; it documents the annual reporting record that Snap-On Tools Co has filed with the EPA under federal community right-to-know requirements.

Quick Facts

Industry
Fabricated Metals
NAICS Code
332216
Total Releases
842.7K lbs
Chemicals Reported
8
Latest Report Year
2023

Compare this facility

See how Snap-On Tools Co stacks up against nearby facilities and the typical reporter.

Total reported releases
Snap-On Tools Co
842.7K lbs
Nyrstar Clarksville Inc
72.9M lbs

99% less than the comparison

Chemicals reported
Snap-On Tools Co
8
Nyrstar Clarksville Inc
13

38% less than the comparison

Comparison reflects reported pounds and chemical counts, not toxicity or health risk. Averages cover facilities reporting any release.

How does this facility release toxic chemicals?

How Snap-On Tools Co releases toxic chemicals into the environment. Total: 842.7K lbs.

Off-site Transfers 821.0K lbs (97.4%)
Air Releases 21.6K lbs (2.6%)
Water Discharges 159 lbs (<0.1%)
View 5-Year Emissions Trend →

Emissions Trend Summary

From 2019 to 2023, total releases increased by 25% (86.6K lbs to 107.9K lbs).

Reported total releases by year

Snap-On Tools Co - annual TRI totals

million lbs

What this shows Year-over-year reported totals. TRI figures are self-reported estimates and can swing with production levels, waste-rock handling and reporting changes, not only with emissions controls.

Source EPA Toxics Release Inventory (TRI)
Year Total Chemicals
2019 86.6K lbs 6
2020 303.8K lbs 8
2021 170.1K lbs 8
2022 174.4K lbs 8
2023 107.9K lbs 8

Chemical Releases

Aggregated across all reporting years (2019–2023). 2 of 8 chemicals are carcinogens. Sorted by total release volume.

Chemical Total Flags
Nickel 628.3K lbs Carcinogen
Chromium 134.8K lbs -
Manganese 72.4K lbs -
Lead 6.7K lbs Carcinogen
Zinc compounds 334 lbs -
Copper 136 lbs -
Nitrate compounds (water dissociable; reportable only when in aqueous solution) 119 lbs -
Hydrochloric acid (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any particle size) 0 lbs -

Location

Coordinates
36.3266, -82.2057
ZIP Code
37643
EPA Facility ID
37644SNPNTSTATE

About TRI Data

Data as of 2023 reporting year. Source: U.S. Environmental Protection Agency (EPA) Toxic Release Inventory.

Data comes from the EPA Toxic Release Inventory (TRI) program. Facilities that manufacture, process, or otherwise use listed toxic chemicals above threshold amounts are required to report annually to the EPA.

Release quantities are self-reported by the facility and may represent estimates rather than exact measurements. "Total releases" includes releases to air, water, land, and off-site transfers for disposal. Quantities shown here are aggregated across all available reporting years.

PlainEnviro presents this data without advocacy framing. The presence of a facility in the TRI database does not by itself indicate a health risk. For site-specific health questions, consult your local environmental or health agency.

Frequently Asked Questions

What chemicals does Snap-On Tools Co release?
Snap-On Tools Co has reported releases of 8 chemicals to the EPA Toxic Release Inventory, totaling 842.7K lbs. 2 of these (25%) are classified as carcinogens.
What industry is Snap-On Tools Co in?
Snap-On Tools Co is classified under the "Fabricated Metals" industry (NAICS code 332216), located in Elizabethton, TN.
How long has Snap-On Tools Co reported to the TRI?
Snap-On Tools Co has EPA Toxic Release Inventory data spanning 5 years, from 2019 to 2023.
How does Snap-On Tools Co release toxic chemicals?
The primary release pathway for Snap-On Tools Co is off-site transfers, accounting for 97.4% of total releases (821.0K lbs). Secondary pathway: air releases (2.6%).
Are emissions from Snap-On Tools Co increasing or decreasing?
From 2019 to 2023, total releases increased by 25%, from 86.6K lbs to 107.9K lbs.
Is Snap-On Tools Co a health risk?
The presence of a facility in the TRI database does not by itself indicate a health risk. Release quantities are self-reported estimates. For site-specific health questions, consult your local environmental or health agency.
Does Snap-On Tools Co release carcinogens?
Yes, Snap-On Tools Co reports 2 chemicals classified as carcinogens, representing 25% of all chemicals reported by this facility. Carcinogen classification is based on EPA and IARC assessments.

What to do with this facility's data

Use this facility profile as a starting point, then check how it compares.

  • See whether releases reported by Snap-On Tools Co are rising or falling over time. View trends
  • This facility ranks #1,442 of 25,902 TRI facilities nationwide by total reported releases - among the top 5.6% of reporting sites by volume. Ranking reflects reported pounds, not toxicity or health risk. See the full rankings
  • Check Tennessee's statewide profile for the full picture: total facilities, water systems, and Superfund sites. View Tennessee profile

TRI release totals are self-reported estimates submitted to the EPA, not independently measured stack emissions; a high rank reflects reported volume, not necessarily local health risk.

Related

Sources & how this page was built

Every figure on this page traces to public, federal-government data on Snap-On Tools Co. The records below are the primary sources; our methodology explains how they are joined, computed, and verified.

Retrieved and formatted by PlainEnviro Editorial. TRI release totals are self-reported estimates, not measured stack emissions.

According to the U.S. Environmental Protection Agency, the Toxics Release Inventory has required annual industrial disclosure since its creation under the Emergency Planning and Community Right-to-Know Act in October 1986, and this facility's record is drawn from PlainEnviro's database of more than 25,000 EPA-tracked facilities through the 2023 reporting year; see our methodology for full source citations and refresh cadence.